ARUBA AP-130-NMT-W2 AP MOUNT KIT SECURE AP-200

Name: ARUBA AP-130-NMT-W2 AP MOUNT KIT SECURE AP-200
Brand: ARUBA
SKU: AP-130-NMT-W2
Price: 466.80 TRY
Availability: InStock

467 ₺

Tavsiye Et Yorum Ekle Fiyat Alarmı Alışveriş Listeme Ekle

Sepete Ekle

Hemen Al

%100 GÜVENLİ ALIŞVERİŞ

Güvenilir E-Ticaret Platformu

ÜCRETSİZ KARGO

Tüm Ürünlerde Ücretsiz Kargo Fırsatı

KOLAY İADE

14 gün içinde iade hakkı

AYNI GÜN KARGO

Saat 10.00'a Kadar Verilen Siparişler Aynı Gün Kargoda

Ürün Özellikleri
Ödeme Seçenekleri
Yorumlar (0)
Tavsiye Et

Model		RG-AP130(W2)
Radio		Concurrent dual-band dual-radio
Protocol		802.11a/b/g/n, 802.11ac Wave 1, 802.11ac Wave 2
Operating Bands		2.4GHz and 5GHz
Antenna		Built-in omnidirectional antenna 2×2 MU-MIMO
Spatial Streams		2
Modulation		11b: DSS:CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM
Maximum Transmit Power		≤100mW (20dBm, transmit power of the RF card only)
Service Ports		Front: 4 10/100/1000M Ethernet ports Side: 1 RJ-45 port (RJ-11 combo) Rear: 1 10/100/1000M uplink port 1 RJ-45 pass-through port (RJ-11 combo)
Management Port		1 console port (Micro USB)
Lock		Standard: Anti-theft screws and ordinary screws Optional: Lock and key
Color Plate Cover Options		White, black, silver and gold
LED Indicators		1 LED status indicator
IP Rating		IP41
WLAN	Maximum clients per AP	Up to 32
	BSSID capacity	Up to 8 per radio Up to 16 per AP
	SSID hiding	Support
	Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID	Support
	Remote Intelligent Perception Technology (RIPT)	Support
	Intelligent identification of smart device	Support
	Intelligent load balancing based on the number of users or traffic	Support
	STA control	SSID/radio-based
	Bandwidth control	STA/SSID/AP-based speed control
Security	PSK, Web, and 802.1x authentication	Support
	Data encryption	WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits)
	QR code authentication	Support
	SMS authentication	Support
	PEAP authentication	Support
	Data frame filtering	Whitelist, static/dynamic blacklist
	User isolation	Support
	Rogue AP detection and countermeasure	Support
	Dynamic ACL assignment	Support
	RADIUS	Support
	CPU Protection Policy (CPP)	Support
	Network Foundation Protection Policy (NFPP)	Support
	Wireless Intrusion Detection System (WIDS)	Support
	Remote probe	Future release support
Routing	IPv4 address	Static IP address or DHCP reservation
Routing	Multicast	Multicast to unicast conversion
Location-based Service	Wireless position tracking	Support
Management and Maintenance	Network management	SNMP v1/v2C/v3, Telnet, TFTP, FTP and web management
	Visualized wireless heat map analysis	Support
	Real-time spectrum analysis	Support
	Fault detection and alarm	Support
	Statistics and logs	Support
	FAT/FIT switching	The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.
Dimensions (W x D x H) (mm)		116 × 86 × 42
Weight		0.23kg
Installation Mode		Standard 86-type faceplate installation
Power Supply		PoE (802.3af), local DC power supply
Power Consumption		<8W
Temperature		Operating Temperature: -10°C to 45°C
Temperature		Storage Temperature: -40°C to 70°C
Humidity		Operating Humidity: 10% to 95% (non-condensing)
Humidity		Storage Humidity: 5% to 95% (non-condensing)