x

%100 GÜVENLİ ALIŞVERİŞ

Güvenilir E-Ticaret Platformu

ÜCRETSİZ KARGO

Tüm Ürünlerde Ücretsiz Kargo Fırsatı

KOLAY İADE

14 gün içinde iade hakkı

AYNI GÜN KARGO

Saat 10.00'a Kadar Verilen Siparişler Aynı Gün Kargoda
  • Ürün Özellikleri
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Tavsiye Et
  • SilkWorm
    200E
    Dimensions
    Height 1.69 in. (4.29 cm)
    Width 16.87 in. (42.85 cm)
    Depth 12.10 in. (30.734 cm)
    Weight 8.8 lbs (4.0 kg)


    Memory Type Installed Memory
    Main memory (SDRAM) 128 MB
    Compact flash 256 MB


    Specification Description
    Autoconfiguring port types F_Port, FL_Port, and E_Port
    System architecture Nonblocking shared-memory switch
    System processor PPC440GP, 333 MHz
    SDRAM 128 MB DDR SDRAM onboard memory operating at 133 MHz
    Compact flash 256 MB module
    ANSI Fibre Channel protocol FC-PH (Fibre Channel Physical and Signaling Interface standard)
    Modes of operation Fibre Channel Class 2, Class 3, Class F
    Fabric initialization Complies with FC-SW-2 6.6
    Ethernet port One 10/100 Mbit/sec Ethernet port; accessed through RJ45
    connector
    Terminal port One UART interface for terminal, accessed through DB9 connector
    ASIC Goldeneye ASIC for Fibre Channel Switching
    Port Status LEDs 16 LEDs (green/amber) to indicate status for each port
    Link Speed LEDs 16 LEDs (green/amber) to indicate link speed for each port
    System Power LED One LED (green) to indicate system power
    System Status LED One LED (green/amber) to indicate system status
    Ethernet LEDs Two Ethernet LEDs to indicate speed and link status
    Power supply One fixed power supply (not a FRU)
    Fans Three fixed fans operating at dual speeds (not a FRU). RPM data
    are not available for these fans.
    FC-IP (IP over Fibre Channel) Complies with FC-IP 2.3 of FCA profile
    Aggregate switch I/O
    bandwidth
    128 Gbit/sec if all 16 ports running at 4 Gbit/sec, full duplex
    Port-to-port latency Less than 2 microseconds with no contention (destination port is
    free)
    EMC (electromagnetic
    compatibility)
    Emissions
    An operating SilkWorm 200E conforms to the emissions
    requirements specified by the following regulations:
    • FCC Rules & Regulations, Part 15 subpart B, Class A
    • CSA C108.8 Class A
    • VCCI Class A ITE
    • CISPR 22 Class A
    • EN55022 Class A
    • Korean EMC Requirements
    • BSMI Standard CNS 13438
    • EMC Directive 89/336/EEC
    • EN50082-2/EN55024: 1998
    • ICES-003 Class A
    Immunity
    • IEC 61000-4-2 Severity Level 3 for Electrostatic
    Discharge
    • IEC 61000-4-3 Severity Level 3 for Radiated Fields
    • IEC 61000-4-4 Severity Level 3 for Fast Transients
    • IEC 61000-4-5 Severity Level 3 for Surge Voltage
    • IEC 61000-4-6 Conducted Emissions
    • IEC 61000-4-11 Voltage Variations
    • EN 61000-4-12 Oscillatory Waves Immunity
    • EN 61000-3-2 Limits for Harmonic Current Emissions
    • EN 61000-3-3 JEIDA

     

    AÇIKLAMA

    • Ürünler faturalı olarak tarafınıza gönderilecektir.
    • Ürünlerimiz 90 gün süreyle Garantilidir.
    • Ürün iade süresi 14 gün olup, iade durumunda kargo bedeli alıcıya aittir.
    • Saat 16:00'ya kadar verilen siparişler aynı gün kargoya verilir.
    • Pazartesi-Cuma 09:00 - 18:00 mesai saatlerimizdir.

     

    Arayıp da bulamadığınız tüm Network ve Server yedek parçalarını tedarik ediyoruz.

    (Cisco, Avaya, Lenovo, HP, IBM, Fujitsu, Samsung, Huawei, Enterasys, Juniper, Alcatel, Sun, Qlogic, Dell, Emulex)

     

    Ürün Özellikleri
    Kondisyon
    :
    REFURBISHED
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.