CISCO GLC-LH-SM SFP LC CONN LX/LH TRANSCEIVER

Product Specifications

Cabling and Connectors

Connectors include the following:

• Dual LC/PC connector (1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX and 1000BASE-ZX)
• Single LC/PC connector (1000BASE-BX-D and 1000BASE-BX-U)

Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section.

Table 1 provides cabling specifications for the SFPs that you install in the Gigabit Ethernet port. Note that all SFP ports have LC-type connectors, and the minimum cable distance for all SFPs listed (multimode and single-mode fiber) is 6.5 feet (2 m).

Table 1. SFP Port Cabling Specifications

* A mode-conditioning patch cord, as specified by the IEEE standard, is required regardless of the span length. Note how the mode conditioning patch cord for 62.5-μm fibers has a different specification from the mode-conditioning patch cord for 50-μm fibers.

AÇIKLAMA

• Ürünler faturalı olarak tarafınıza gönderilecektir.
• Ürünlerimiz 90 gün süreyle Garantilidir.
• Ürün iade süresi 14 gün olup, iade durumunda kargo bedeli alıcıya aittir.
• Saat 16:00'ya kadar verilen siparişler aynı gün kargoya verilir.
• Pazartesi-Cuma 09:00 - 18:00 mesai saatlerimizdir.

Arayıp da bulamadığınız tüm Network ve Server yedek parçalarını tedarik ediyoruz.

(Cisco, Avaya, Lenovo, HP, IBM, Fujitsu, Samsung, Huawei, Enterasys, Juniper, Alcatel, Sun, Qlogic, Dell, Emulex)