Cisco Catalyst WS-C3750X-48T-S 48-Port Gigabit Managed Ethernet Switch

WS-C3750X-48T-S data sheet

Manufacturer

Cisco Systems, Inc

Manufacturer Part Number

WS-C3750X-48T-S

Product Type

Managed, Stackable 48 ports L3 Switch

Form Factor

Fixed, Rack Mountable 1U, Stackable/Clustering

Switch Port density - Uplinks

48 x 10/100/1000 Ethernet Ports

Max Number of Stacks

9

Routing Protocol

RIP-1, RIP-2, HSRP, static IP routing, RIPng

Remote Management Protocol

SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI

Authentication Method

Kerberos, Secure Shell (SSH), RADIUS, TACACS+

Features

Hot swap module replacement, Layer 3 switching, Layer 2 switching, dynamic IP address assignment , DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), EIGRP Stub Routing

Compliant Standards

IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae

DRAM Memory

256 MB

Flash Memory

128 MB Flash

LED Status Lights Indicators

Port status, link activity, port transmission speed, port duplex mode, power, system

Connectivity / Expansion Slots

Interfaces

48 x 10Base-T/100Base-TX/1000Base-T - RJ-45
USB : 1 x 4 PIN USB Type A
1 x console - mini-USB Type B - management
1 x RS-232 - RJ-45 - management
1 x 10Base-T/100Base-TX - RJ-45 - management
Network stack device : 2 x

Expansion Slot(s)

1 (total) / 1 (free) x Expansion Slot

Power Supply Specifications

Power Device

Power supply - redundant - plug-in module

Installed Qty

1 (installed) / 2 (max)

Power Redundancy

Optional

Power Redundancy Scheme

1+1 (with optional power supply)

Voltage Required

AC 120/230 V ( 50/60 Hz )

Features

Redundant Power System (RPS) connector